How To Unbrick Your Android Phone Using Sp Flash Tools

Unknown 00:30 Tech 1 comment

Before you begin the procedure,

NB:I am not responsible for any issues that void your phone as
   you do this at your own risk, Pls if you are not certain of
   how to handle this, kindly give it to people that know much
   about it that can help you.

Lets Start....

How to Flash Android SmartPhone Using SP Flash Tool

Requirements
SP Flashtool (Download here)
Android Rom(Download here)
VComm Driver (Download here)

==>Make sure you've successfully downloaded Android rom provided by Team Hovatek
==>Make sure you have successfully installed VCom Driver on your PC or follow the guide below to install Vcom driver

==>INSTALLING VCOM DRIVER
1. Extract the downloaded vcom driver.
2. Go to device manager>click action>click add legacy hardware
3. Under welcome to add new hardware click next
4. Select advanced option and click next
5. Select ‘show all devices’ and click next.
6. Click have disk
7. Browse to your vcom extracted folder and select the driver setup up file and click
open, then ok.
8. Select Mediatek preloader usb vcom driver and click next.

==>SP Flashtool
1. Navigate to the SP flash tool folder
2. Run the SP flash tool.exe as admin
3. Click on scatter loading. Navigate to the rom folder and select the scatter file MT6580_Android_scatter.txt or related"
4.At the left hand side just below the 'scatter loading' panel click on 'download now'
then click on download beneath down arrow

5. Switch off your Phone (make sure it has about 90% charge) and connect it to your PC using usb cord
6. A progress bar should start running. The phone
will be upgraded on booting-Make sure you don’t tamper with usb at this point.
The final result after about 5-10 min should be like this if all went well

7. After that confirmation close flash tool. Disconnect phone and switch it on. It will take some minutes before the setup is complete.

Credit to oga yomi on this